Kuppersberg HH 6612 T, Технический паспорт, Страница: 12 / 72

12
TECHNICAL PASSPORT ENGLISH
Electric oven
Setting selection knob
Turn left / right to set the
temperature or time. Turn right toward
the «+» to increase. Turn left toward
the «–» to decrease. Turn and hold to
increase/decrease by bigger increments.
Turn on the oven and set the
time.
When you plug in the appliance
there is a [confirmation] beep. Set the
current time. The current time must be
set for the appliance to operate. Touch
controls or knobs do not respond. An
[error] beep is emitted. You can only set
the current time .
The clock shows 24-hour or AM/PM
time. Touch and hold for 3 seconds
to set the time. You will hear the
[confirmation 2] beep and «24 h» or
«12 h» will flash on the display. Use the
setting selection knob to change the
time mode. Touch briefly to confirm.
Hour digits will start to flash. Use
the setting selection knob to set the
hour 00–23 (or 01–12 AM, 01–12 PM
depending on time mode). The hour
digits stop flashing. Touch
briefly
to confirm. A [confirmation] beep is
emitted. The minutes digits start to
flash and you can now set the minute.
Use the
setting selection knob
to set
the minute. Touch to confirm. An
[end] beep is emitted. Digits are not
flashing and the clock shows current
time. The second indication colon is
flashing. If you do nothing for 5 seconds
when setting the time, the [settings
entered] beep is emitted. The clock will
be set to the last setting entered by the
user. The oven enters the standby mode.
You can use oven functions. In standby
mode, the display intensity set to low.
The following are displayed:
Â
clock,
Â
symbols of the active functions:
oven cavity residual temperature, child
lock, kitchen timer, door lock.
When you use any controls the
appliance enters the operating mode.
Display intensity is set to high.
I
I II