Kuppersberg GS 6020, Технический паспорт

Страница: 4 / 34

6 7
TECHNICAL PASSPORT ENGLISH ENGLISH TECHNICAL PASSPORT
Dishwasher Dishwasher
3. OPERATION INSTRUCTION
Control Panel
1. Program indicator light: when you
select a washing programme, the
corresponding light will display.
2. Program select button: Press the
button to select the program. The
«Eco wash” indicator will fl ash if it’s
connected to the power. Push the
button to switch the programme
from «Eco»~»Light»~ «Crystal’’—
»Rapid»—»Pre-rinse”—»Intensive»
and select the one you want.
3. Salt and rinse aid indicator light:
To come on when the softener or
dispenser needs to be refi lled
4. Display: To display delay time or
error codes or the estimated time
left for programme to run.
5. Delay time: This option will allow
you to delay the start time of any
wash cycle for up to 24 hours
(depending on model). Select
the delay start time you want by
pressing the DELAY pad. Multiple
pressing will increase the delay
hours.
6. ON/OFF Button: To turn on/off the
power supply.
7. Check water supply indicator: The
indicator lights up if the tap turn
off or water supply interrupted or
supply hose kinked.
8. Child lock : The “child lock”will
be available when you press the
button 3 seconds ,and the indicator
lights up after fl ashing times
9. 60 min programme: Daily wash in
only 1 hour.
10. 3 in 1 function : The product is
offered with additional functions,
The additional function could be
used with the programme such as
«intensive « « Eco» and « Light.»
11. After select the desired program,
close the door ,the dishwasher in
function status.
Dishwasher Features
1. Front View
2. Upper Basket
3. Spray Arms
4. Lower Basket
5. Water Softener
6. Detergent Dispenser
7. Rinse Aid Dispenser
8. Cutlery Tray
9. Cup Holder
4. PRIOR USING
FOR THE FIRST TIME
Before using your dishwasher
for the fi rst time:
A. Set the water softener
B. Pour 500ml of water inside
the salt container and then fi ll with
dishwasher salt
C. Fill the rinse aid dispenser
D. Function of detergent
А. Water Softener
The water softener must be set
manually, using the water hardness dial.
The water softener is designed to
remove minerals and salts from the
water, which would have a detrimental
or adverse effect on the operation of
the appliance. The higher the content
of these minerals and salts, the harder
the water is. The softener should be
adjusted according to the hardness
of the water in your area. Your local \
Afeiter Authority can advise you on the
hardness of the water in your area.
* Adjusting Salt Consumption
The dishwasher is designed to allow
for adjusting the amount of salt consumed
based on the hardness of the water
used. This is intended to optimize and
customize the level of salt consumption
so that the salt consumption could be
set proceed as follows:
1. Unscrew the cap from the salt
container
2. There is a ring on the container
with an arrow on it (see fi gure to
the side), if necessary, rotate the
ring in the anticlockwise direction
from the «-» setting towards the
«+» sign, based on the hardness
of the water being used. It is
recommended that adjustments
should be made in accordance with
the following schema:
* For optional