8
TECHNICAL PASSPORT
ENGLISH
Dishwasher
Water hardness table
Water hardness
Mmol/I
Set value on
the machine
“Clark
Range
0-8
soft
0-1.1
HO
9-10
soft
1.2-1.4
H1
11-12
medium
1.5-1.8
H2
13-15
medium
1.9-2.1
H3
16-20
medium
2.2-2.9
H4
21-26
hard
3.0-3.7
H5
27-38
hard
3.8-5.4
H6
39-62
hard
5.5-8.9
H7
B. Loading the Salt into
the Softener
Always use saltintended for use with
dishwasher.
NOTE:
If yourmodel has nowater
softener,you may skipthis section
WATER SOFTENER
The hardness of the water varies
from place to place. If hard water is
used in the dishwasher, deposits will
form onthe dishes andutensils.
The appliance isequipped with
aspecial softener thatuses salts
specifi cally designed to eliminatelime
and mineralsfrom the water.
The salt container is located beneath
the lower basket and should be fi lled as
follows:
Attention!
Only use salt specifi cally designed
for use in dishwashers! All other types
of salt not specifi cally designed for
use in a dishwasher, especially table
salt, will damage the water softener. In
case of damages caused by the use of
unsuitable salt the manufacturer does
not give any warranty nor is liable for
any caused damages.
Only fi ll with salt just before
starting one of the complete washing
programmes.
This will prevent any grains of salt
or salty water, which may have been
split, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
After the fi rst wash cycle the control
panel light expires.
A. Remove the lower basket and
then unscrew and remove the cap from
the salt container.
1