Kuppersberg GIM 4578, Технический паспорт, Страница: 68 / 156

68
TECHNICAL PASSPORT ENGLISH
Dishwasher
Connection of drain hoses
Insert the drain hose into a drain
pipe with a minimum diameter of 4 cm,
or let it run into the sink, making sure
to avoid bending or crimping it. The
height of drain pipe must be less than
1000mm. The free end of the hose must
not be immersed in water to avoid the
back flow of it.
Please securely fix the drain hose in
either position A or position B.
How to drain excess water from
hoses
If the connection to the drain pipe is
positioned higher than 1000 mm, excess
water may remain in the drain hose. It
will be necessary to drain excess water
from the hose into a bowl or suitable
container that is held outside and lower
than the sink.
Water outlet
Connect the water drain hose. The
drain hose must be correctly fitted to
avoid water leaks. Ensure that the water
drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension,
make sure to use a similar drain hose.
It must be no longer than 4 meters;
otherwise the cleaning effect of the
dishwasher could be reduced.
Syphon connection
The waste connection must be at a
height less than 1000 mm (maximum)
from the bottom of the dishwasher.
Back of
dishwasher
Counter
MA
X 1000mm
Drain hose
Mains Cable
Water Inlet
Drain Pipe
A
B