Kuppersberg FA6IF C, Технический паспорт

Страница: 5 / 28

5
english Technical passporT
inDUcTion hoBs
USER INSTRUCTIONS
GENERAL INFORMATION
Carefully read the contents of this
leafl et since it provides important
instructions regarding safety of
installation, use and maintenance.
Keep the leafl et for possible future
consultation. All the operations relating
to installation (electrical connections)
must be carried out by specialised
personnel in accordance with current
regulations.
SAFETY INSTRUCTIONS
This apparatus is not suitable for
use by children or people who need
supervision.
For safety reasons, never place large
ferromagnetic objects (e.g. oven plates
for cakes) on the cooking zone of the
fi breglass top.
People carrying pacemakers are
advised to consult a doctor before using
the induction cooking zones.
Metal objects such as knives, forks,
spoons or covers must not be placed on
the surface of the cooking top because
they can become heated.
IMPORTANT: After use, switch
the cooking top off with the
command device.
Â
Avoid spilling liquid, therefore to
boil or heat liquids, reduce the heat.
Â
Please ensure when the
appliance is turned on, that there are no
empty pots left on top.
Â
When you have fi nished cooking,
switch off the relevant heating element
with the command indicated below.
WARNING
If the surface of the hob is cracked,
turn off the appliance and disconnect
from the electrical main in order to avoid
any possible electric shocks.
INSTALLATION
INSTRUCTIONS
These instructions are for a
specialized installer and are a guide
for the installation process, regulations
and maintenance in accordance with
the law and current standards. If the
built-in oven or any other appliances
that produce heat, need to be installed
directly underneath the cooking hobs
in ceramic glass, IT IS NECESSARY
THAT THE APPLIANCE (oven) AND THE
COOKING HObS IN CERAMIC GLASS
ARE ADEQUATELY ISOLATED , in such a
way that the heat generated from the
oven, measured on the right hand side
of the bottom of the cooking hobs, does
not exceed 60°C.
Failure to follow this precaution,
could cause a malfunction in the TOUCH
CONTROL system.
POSITIONING
The domestic appliance was built in
order to be encased on a work surface,
the way it is illustrated in the graph
(Fig.1). Predispose sealing material
(Fig.4) along the whole perimeter (for
dimensions of the cut see Fig.1). Lock
the domestic appliance into place with