Kunzle & Tasin Bona Scorpion DCS Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 32

Kunzle & Tasin Bona Scorpion DCS Скачать руководство пользователя страница 19

19

Machine Warnings

This equipment is not suitable for collecting hazardous dust.

Using the machine to move objects or moving on an incline may cause injury or damage. The machine

must only be used to sand dry wooden floors which are level or have a maximum incline of 2%.

DO NOT

use the machine to sand furniture.

DO NOT

sit astride the machine when it is operating.

Work surfaces may be seriously damaged if the machine is left turning on one point while the tool is

in contact with the surface. To avoid damaging the surface, approach the cutting line carefully.

DO NOT

stop when lowering and raising the equipment, keep moving at constant speed.

1)

Become familiar with the machine and read all instructions & safety

notices. Ensure that all operators read this manual.

2)

Remove the extractor head

(A)

and the filter

(B)

from the body of the

extractor.

To start the machine proceed as follows:

Starting the Machine

Sander operation

Prohibited use

Children should be supervised to ensure that they do not play with the appliance. This machine is not

intended for use by persons (including children) with reduced physical, sensory or mental capabil-

ities, or lack of experience and knowledge unless they have received instructions regarding the use

and are supervised by a person responsible for their safety.

«
...
17
18
19
20
21
...
»

Содержание Bona Scorpion DCS

































Отзывы:

Нет отзывов