16
bona.com
Bona CombiEdge Short/Long Manual
Starting the Machine (Cont.)
6)
Raise the disc so that the machine is only resting on the floor with
its wheels. Then, press and hold the switch
(A)
.
7)
Keep the machine moving when the abrasive disc is lowered and in
contact with the work surface.
8)
To stop the machine, raise the disc so that the machine is only resting on the floor with its wheels. Then, release the switch
(A)
.
The switch must be kept pressed to operate the machine. The machine gradually stops when the switch is
released or the power supply is interrupted.
The disc does not stop immediately! Take care not to touch it with any part of the body during
this phase.
If velcro-backed abrasive is to be used, proceed as follows:
Machine Adjustment Procedures
Abrasive assembly procedures