15
1)
Become familiar with the machine and read all instructions & safety
notices. Ensure that all operators read this manual.
3)
If using DCS, connect DCS cuff to shorter DCS pipe and fasten with a clamp.
If using a dust bag, place the dust bag on the suction pipe by tying the cord over the flange.
2)
Bring the machine to the place of work.
To start the machine proceed as follows:
Starting the Machine
Only use discs with a diameter of 150mm.
4)
Fit the disc in accordance with the
'Abrasive Assembly
Procedures'
(page 16-17).
5)
Locate the power supply. The socket must be compatible with the
plug. To avoid electrical hazards the socket must be grounded with
a 20 Amp fuse. Connect the plug to the socket.