20
21
KC3904 WH
Problem
Possible cause
Solution
The
appliance
does not
work
The temperature
regulation knob is set at
number “0”.
Set the knob at other
number to switch
on the appliance.
The power plug is not
plugged in or is loose.
Insert the power plug.
a fuse has blown or is
defective.
check the fuse, and
replace it if necessary.
The socket is defective.
any mains malfunctions
are to be corrected by
an electrician.
The food is
too warm
The temperature is not
properly adjusted.
Please refer to the initial
Temperature Setting
section.
The door was open for
an extended period.
open the door only when
needed.
a large quantity of warm
food was placed in the
appliance within the last
24 hours.
Temporarily turn the
temperature regulation
to a colder setting.
The appliance is near
a heat source.
Please refer to the
installation location
section.
The
appliance
cools too
much
The temperature is set
too cold.
Temporarily turn the
temperature regulation
knob to a warmer setting.
unusual
noises
The appliance is not
levelled.
re-adjust the feet.
The appliance is touching
the wall or other objects.
Slightly move
the appliance.
a component, e.g.
a pipe, on the back of
the appliance is touching
another part of the
appliance or the wall.
If necessary, carefully
bend the component
out of the way.
There is
water on
the floor
The water drain hole
is blocked.
refer to the cleaning
section.
The side
panel is hot
The condenser is inside
the panel.
This is normal.
If the malfunction shows again, please contact the Service Centre.
EN
refrigerator combi
Frigo-KC3904-Manual-2.indd 21
18/02/02 16:39