10
11
KBCR3886
EN
car radio
2. Auto search stations (
/
key)
In radio mode, press the
or
key to automatically search
the previous or next stations. If a station is found, the unit will stop
searching.
3. Manual search (
/
key)
In radio mode, press and hold the
or
key to switch to manual
search mode. The device will manually search the previous or next
station. When the desired station is close stop holding the key and
press either the
or
key to fine-tune the frequency until you
hear your favorite station. If no key is pressed within 5 seconds, the
radio will switch to auto search.
4. Auto storage (BND/AS)
In radio mode, long press BND/AS to automatically search channels
and store them using keys [1] to [6] under the directory of FM1, FM2
and FM3. Once stored, the radio will play all stored channels in order
for 5 seconds. At this point, either long press BND/AS or keys [1] to
[6] to select the desired channel.
5. Manual storage (keys 1-6)
In radio mode, press and hold any one of keys 1-6. The current
station will be stored.
6. Play the preset stations (keys 1-6)
In radio mode, press any one of keys 1-6 to play the relevant station.
MP3 Player Operation
The MP3 player can read U discs and SD/MMC/TF cards.
In U disc playback mode, the display will show “MP3” or “USB.
In SD/MMC/TF card playback mode, the display will show “MP3” or
“SD”.
In U disc or SD/MMC/TF card playback mode, the display will also
show playback information such as “track number - playback time”.
1. Select Single Song (
/
key)
In MP3 playback mode, press the
or
key to select the next
or previous song respectively.
2. FB/FF (
/
key)
In MP3 playback mode, press and hold the
or
key to fast
backward or forward.
3. -/+10 (5/-10, 6/+10 key)
In MP3 mode, press 5/-10 or 6/+10 to select the previous 10 songs
or the next 10 songs.
4. Pause (1/PAU key)
In MP3 playback mode, press 1/PAU key to pause. The “track
number” will flash on the display; press 1/PAU key again to resume
playback.
5. INT (2/INT key)
In MP3 mode, press 2/INT key to browse songs (play the first 10
seconds of each song). The “track number” will flash on the display;
press 2/INT key again to resume playback.
6. Repeat (3/RPT key)
In MP3 mode, press 3/RPT key to repeat play, “RPT” will show up
on the display; press 3/RPT key again to cancel the repeat of play.
7. Random (4/RDM)
In MP3 mode, press 4/RDM key to start random playback. “RDM” will
be shown on the display; press 4/RDM key again to cancel random
playback.
Bluetooth Function
1. Connect the Phone to the Unit
Place your phone near the unit and switch on your Bluetooth. Search
for “CAR-BT”. Once found click on it, enter the password if necessary
(0000) and connect.
2. Talk directly via Bluetooth
To Make Calls
Once the unit and the phone are connected via Bluetooth, you can
make calls directly from the unit.
To Answer Phone Calls:
The unit will ring when there is an incoming call. Press BND/AS to
answer the call or you can answer it directly on your phone.
To Hang Up:
Press the “MOD” button to hang up the call or hang up on the phone
directly.
3. Playing Music Via Bluetooth
Once the phone and unit are connected via Bluetooth, press the
“MOD” key to change the mode to “BT”. Enter the music player on
your phone and the music will play through the unit.
Clock Operation
1. Clock display
In MP3 playback mode, press the CLK key, the display will show
the clock instead of MP3 playback information. Press the CLK key
again or the display will switch back to the MP3 playback information
if there is no further input within 5 seconds. The clock is a 24-hour
clock.
2. Clock adjustment
When the unit is powered ON, continually press the CLK key until
the display shows the “hour” information (blinking) instead of MP3
playback information, and then rotate the Volume Knob to adjust the
hour. Short press CLK again until the display shows the “Minute”
