Kunbus FNL Series, Начало работы

Страница: 4 / 22

FNL Getting Started
4 / 22
2 Install
2.1 Install FNL
Install FNL according to the Installation Instructions (document
FNL_EN.pdf), by connecting FNL to a power supply (24 Volts DC) as
well as to an Ethernet network. The A PC used for the FNL
configuration must be connected to the same Ethernet network as
well. A direct connection between the PC and FNL via an Ethernet
cross cable is also possible.
2.2 Install Software
The delivered software on the CD needs to be installed on a
Windows-based PC. Start the setup program and follow the
instructions to install the software. The setup program copies all
necessary components to the PC.
Install