- 9 -
DIODE MEASUREMENT
1. Red lead to “INPUT”, Black lead to “COM”.
2. RANGE switch to “
” range.
3. Connect the red test lead to the anode of the diode to
be measured and black test lead to cathode.
4. The forward voltage drop in mV will be displayed. If
the diode is reversed, figure “1” will be shown.
TEMPERATURE MEASUREMENT
1. RANGE switch to ºC or ºF range, it will display room
temperature in ºC or ºF value.
2. Connect the K-type thermoelectric couple to “INPUT”
and “COM” jacks.
3. The display will read Temperature value ºC or ºF.
NOTE: The TP-01 K-type thermocouple Max. Operating
temperature of Probe: 250˚C/482˚F (300˚C/572˚F
short-term). The sensor supplied with the instrument is
an ultra fast response naked bead thermocouple
suitable for many general purpose applications.
AUDIBLE CONTINUITY TEST
1. Red lead to “INPUT”, Black lead to “COM”.
2. RANGE switch to “ ” range.
3. Connect test leads to two points of circuit to be
tested. If the resistance is lower then 30Ω±20Ω, the
buzzer will sound.
BATTERY TEST
1. Connect the black test lead to the "COM" jack and
the red test lead to the " INPUT " jack (Note: The
polarity of the red test lead is positive "+").
2. According to the different type of the battery (1.5V,
