- 8 -
3. Connect test leads to device or circuit being
measured.
4. Turn on power of the device or circuit being
measured voltage value will appear on Digital
Display along with the voltage polarity.
DC CURRENT MEASUREMENT
1. Red lead to “INPUT”. Black lead to “COM” (for
measurements between 200mA and 10A connect red
lead to “10A” jack with fully depressed.)
2. RANGE switch to desired DCA range.
3. Open the circuit to be measured, and connect test
leads INSERIES with the load in with current is to
measure.
4. Read current value on Digital Display.
5. Additionally, “10A” function is designed for
intermittent use only. Maximum contact time of the
test leads with the circuit is 15 seconds, with a
minimum intermission time of seconds between
tests.
RESISTANCE MEASUREMENT
1. Red lead to “INPUT”. Black lead to “COM”.
2. RANGE switch to desired Ω range.
3. If the resistance being measured is connected to a
circuit, turn off power and discharge all capacitors
before measurement.
4. Connect test leads to circuit being measured.
5. Read resistance value on Digital Display.
