KUKEN 34179, Инструкция по эксплуатации

Страница: 28 / 71

28
EN
Cleaning / Replacement
Part Recommended cleaning / replacement frequency
Clean water tank Cleaning after each use.
Dirty water tank Cleaning after each use.
HEPA Cleaning after each use. / Replacement every 3-6 months
Filter Cleaning after each use.
Strainer Cleaning after each use.
Brush coverage Cleaning after each use.
Infrared sensor Cleaning after each use.
Roller brushes Cleaning after each use. / Replacement every 3-6 months.
Drying tray Cleaning after each use.
Loading station Cleaning after each use.
Scroll wheels Cleaning after each use.
Note: The above frequency is just for your reference. Actual cleaning / replacement frequency will depend on use.
Problem solving
Problems Possible reasons Solutions
Not loading
• The power supply does not
connect well.
• EasyClean does not connect well
with the charging station.
• Check the connection of the power
supply.
• Put the EasyClean back in the charging
station.
The handle control does not work.
• The battery capacity is low.
• The handle does not connect well.
• Check the battery capacity and charge
it fully.
• Reinstall the handle.
EasyClean does not work.
• The dirty water tank is full.
• The dirty water tank is not installed.
• The rotating brush is not installed.
• Empty the dirty water tank.
• Check and install the dirty water tank.
• Check and install the roller brush.