Warning
• Do not immerse your frother in water or other liquids. This would put the frother in
danger of short-circuiting!
• Never operate a damaged frother. This includes damaged cables.
• Do not place the appliance on a polished wood surface. This may damage the
wood.
• Only operate the frother through a professionally installed socket supplying the
correct voltage.
• Do not use this frother with extension cables.
• Never let the main cable hang loose. Do not remove the plug with wet hands.
Do not lay or hang the able on hot surfaces or let it come into contact with oils.
• Unplug the frother: after each use, when the appliance is not in use, before
changing accessories, and while cleaning the appliance.
• Do not touch the metal parts or the housing when the frother is in use. This may
cause burns or scalding.
• Do not operate this frother with a damaged cord or plug. If the supply cord is
damaged, contact [email protected] for help.
• This appliance conforms to directive 89/336 CEE regarding electromagnetic
compatibility.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should not play with the milk frother. This is not a toy!
• Do not operate the frother outdoors.
• Do not operate without milk in the jug.
• Always attend the frother while in use.
• Turn the appliance and main power off when not in use.
• Never touch rotating parts. This may cause injury!
• Do not exceed the filling capacity or the frother may overflow!
• The frother is to be used only with the base unit provided.
• Never operate the frother on uneven surfaces.
• This frother is not designed for commercial or industrial use; it is for household
use only.
• Do not insert any objects and/or fingers in the appliance apertures.
• 120V 60 Hz, 500 W This appliance is tested according to UL regulations and
corresponds to the UL directives.
