| 17
Setting of welding parameters
Setting the welding method
the selection and confirmation of the welding method is
carried out using the control button.
MMA
- a method designed for welding with a coated
electrode crNi, al, alloys and steel materials.
TIG LIFT
- the method is designed for welding of crNi and
steel materials with dc current. it also allows soldering.
MIG/MAG
- the method is designed for welding of steel,
crNi and al materials. it also allows soldering cusi.
switching button
miG/maG
mma
tiG liFt
MMA
- Welding current setting
activate welding method by switching button. the wel
-
ding current is set using the control n-coder i.
switching button
mma
N-coder i
MMA
- Setting hOT START function
(easier ignition)
the function allows setting the value of the welding
current increase when the arc is ignited. the function
facilitates ignition of the welding arc.
MMA
- Setting ARC FORCE function
the function increases the energy supplied to the shor
-
tening arc by the mma method, thereby accelerating
the electrode melting and preventing it from sticking.
the function is activated when the arc voltage drops
below approx. 17 V.
MMA
- Setting ANTI STICK function
(sticking electrode)
the function reduces the welding voltage to 5 V when
evaluating the short-circuit at the output terminals
(when the electrode is glued to the material to be wel
-
ded), thus allowing easy removal of the electrode from
the material to be welded. the function is automatically
activated each time the machine is switched on.
TIG DC LIFT
- Welding current setting
activate welding method by switching button. the wel
-
ding current is set using the control n-coder i.
switching button
N-coder i
tiG liFt
MIG/MAG
the machine is equipped with a manual control mode.
the user must set the welding parameters manually.
this is a standard process that works depending on the
set parameters in the short-circuit / liquid arc.
MIG/MAG
- Adjustment of welding power
activate welding method by control button. the welding
current is set using the control n-coder i. the speed of
wire feeding is set by n-coder ii.
display wire speed / welding
current
display welding
voltage
N-coder i
N-coder ii
miG/maG
en
