4 - 4
The PG 674 as a programming device
4.3. Key pad
The key pad consists of a numeric block (numbers 0-9), plus
and minus keys, a Shift key, an Enter key and 11 function keys.
4.3.1. Function keys
Enter the key code (0-255) to activate the open mode.
Initialize the cam control unit: set encoder resolution, number
of outputs, dead time allowance and encoder zero point.
Choice of output.
Choice of program number.
Delete (program or output)
and/or undo last entry.
Switch all outputs off ( for switching on see below).
Activate dynamic mode and program dead time compensation
(for outputs 0.00-0.15).
Switch outputs on again
(see above "Switch all outputs off“).
Содержание PG 674
Страница 6: ...Contents 4 Table of contents ...
Страница 18: ...3 6 Operating terminal PG 674 ...
