KUHN WMU 210, Руководство по сборке и эксплуатации

Страница: 14 / 36

- 12 -
FITTING INSTRUCTIONS AND ADJUSTMENTS
1) Fitting instructions for the wheels or the roller
sheath and insert the pin at the required working height (for setting the working height see pages 13 and 14).
Gauge wheel version :
The gauge roller version, being the most commonly used, requires you to dismantle the rear hood and the roller
beforehand.
- The rear crosspiece (CD) is to be fixed on the rear hood location with 4 nuts and bolts, in the holes drilled at this
end of the side plates.
- Fit the yokes (P) to the inside of the rear crosspiece (CD).
- Bolt the wheel supports (R) onto the yokes (P) with the self locking nuts
- Insert the fixation pins into the wheel arms (BR)
- Bolt the side protections (PP) onto the plates.
Gauge roller version :
The rear hood (A) can only be fitted in association with
the roller. To fit it, insert it between the side plates then
fix it using the 4 nuts and bolts (F).
The roller support (D) is fitted onto 2 side arms through
2 housings. Fix the arms of the roller using the holes
(G) or (G’) designed for this on the side plates.
Slide the upper fixation brackets onto the side plates