KUHN HR6004DR, Руководство оператора

Страница: 50 / 96

Power harrow
48
HR6004DR
Instructions for work
Working depth
The roller provides working depth adjustment and
control.
Fit the adjustment pin (2) in one of the adjusting plate
holes (1) to adapt the working depth.
Rear levelling share
The rear levelling share levels the ridge which forms
between the two half-harrows. The rear levelling share is
fitted on the inner left roller arm (1) of the machine.
Setting the rear levelling share in working position.
The rear levelling share is adjusted according to:
- The working depth.
- The soil nature.
- The crumbling degree.
- Adjust the share height using 2 bolts (2). Tightening
torque: 12 daN m (89 lbf ft).
Side deflectors anti-ridging plates.
Adjust side deflector anti-ridging plates according to the
working depth. (See section ’’Side deflector anti-ridging
plate adjustment’’).
Fit adjustment pins in the same hole on both
sides of the machine.
Dry conditions and/or fine crumbling = low
position.
Wet conditions and/or larger clods = high
position.