KUHN GMD33 N, Руководство оператора

Страница: 15 / 72

Safety
Disc mower
GMD33N
13
 PTO shaft
Do not wear loose clothing that could be caught in the
rotating PTO shaft.
Before attaching or removing a PTO shaft, or before
doing any work on the machine, disengage the PTO
drive, turn off the engine, remove ignition key and wait
for all moving parts to come to a complete stop.
If the primary PTO shaft is equipped with a torque limiter
or a free wheel, these must be fitted on the machine
side.
Ensure that the PTO shaft is always correctly fitted and
locked into place.
Before connecting the PTO shaft, ensure that the PTO
speed (rotational frequency) and direction of rotation are
in line with the machine manufacturer's
recommendations.
Before engaging the PTO drive, make sure that there are
no people or animals near the machine. Never engage
the PTO drive when the tractor engine is stopped.
Do not install any adapter device that results in a portion
of the tractor PTO stub, the rotating PTO shaft, or the
adapter to be unguarded. The tractor master shield shall
overlap the end of the splined shaft and the added
adaptor device as outlined in the table.
When uncoupling the machine, rest the PTO shaft on the
support specially provided, and replace protective shield
on the PTO stub of the tractor.
Read and follow the instructions in the operator's manual
provided with the PTO shaft.
Use only PTO shafts supplied with the machine or recommended by the machine manufacturer.
The protective shield of the tractor PTO stub, the PTO shaft guards and the protective shield of the machine
input shaft must always be in place and in good condition.
Make sure that the PTO shaft guards are secured with the safety chains provided. Check that the PTO shaft
guard can turn freely a full rotation independent of the shaft.
Any worn or damaged guards must be replaced immediately. A worn guard or an unprotected PTO shaft can
cause a serious or even a lethal accident.
A
PTO type Diameter X splines
A
±5 mm (0.20’’)
1
35 mm
(1.378’’)
6
85 mm
(3.35’’)
2
35 mm
(1.378’’)
21
85 mm
(3.35’’)
3
45 mm
(1.772’’)
20
100 mm
(4.00’’)