KUHN GF10802T, Руководство оператора

Страница: 48 / 72

Gyrotedder
46
GF10802T
Optional equipment
For forming night windrows:
- Connect PTO shaft to the DUPLEX gearbox input
shaft.
- Fit PTO cover inside the guard to protect the non used
pto stub.
3. Double prop wheels
Kit no. 1126550
This equipment enables machine adaptation to ground
contours.
The double prop wheels are mounted on the right and
left side of the front beam.
Machine use
Putting the machine into work position
- Place the machine in working position.
- Lower the prop wheels using cranks (1) until they are
in contact with the ground.
- Remove lynch pin (2).
- Remove drawbar lock pin (3) and position it in hole (4).
- Insert roll pin (2) to secure pin.
- Rotate crank a few additional times to allow the prop
wheel to stay continuously in contact with the ground:
• Repeat procedure on the other wheel if necessary.