KUHN GA4521GTH Скачать руководство пользователя страница 54

Страница: 54 / 60

Gyrorake

GA4521GTH

Maintenance and storage

3. Maintenance

Check thighteness of all bolts and nuts, particularly on

rotors.

4. Storage

At the end of each season

- Clean the machine thoroughly.
- Put the machine under cover in a dry place.
- Check that all nuts and bolts are sufficiently tightened.
- Lubricate all grease points.
- Clean and pack the connections between rotor arms

and removable tine arms with never-seize grease.

- Check good sealing:

• Of the reduction gearbox.
• Rotors.

- Check the condition of the hydraulic hoses.
- Touch up any areas of damaged paintwork.

At the start of each season

- Re-read the operators' manual.
- Check tyre pressure:

• Rotor wheels: 2 bar (29 psi).

- Check that the lighting system (bulb) functions

properly.

- Make sure that all protection devices are in place and

in good condition.

Avoid high pressure water jets on rotor and
pivot points.

Содержание GA4521GTH





























































Результаты поиска

Содержание GA4521GTH

Отзывы:

Похожие инструкции для GA4521GTH

Бренды по названию

Популярные бренды

KUHN GA4521GTH, Руководство оператора

Результаты поиска

Содержание GA4521GTH

Отзывы:

Похожие инструкции для GA4521GTH

Бренды по названию

Популярные бренды