KUHN GA 300 GT, Руководство по сборке и эксплуатации

Страница: 18 / 28

- 16 -
SWATH SCREEN
Lateral adjustment :
There are 4 positions (C). According to crop density,
extend or retract the swath screen.
Vertical adjustment :
There are five positions (H). Generally, the swath
screen is secured in the middle position. The other four
positions should be used as needed.
For example :
- Upper positions : in very dense crop or in undulating
ground conditions.
- Lower positions : in light crop to prevent the crop from
passing under the swath creen.
Front and rear adjustment :
Depending on the crop density, the swath screen can
be repositioned forward or back to catch grass projected
sideways.
TRANSPORT
To put the Gyrorake into transport position, proceed as
follows :
- Lock the wheel axle adjustment plate (S) in the upper
position using lever (L) (photo 8).
- Using crank handle (M) (photo 8), put the rotor in the
horizontal position.
- Free the swath screen (G) (photo 14).
- Push the swath screen as far as possible towards
the rotor in order to reduce the width of the GA 300
GT to a minimum.
- Lock the swath screen (G) in this position with the pin
(B) (photo 14).