KUHN EL22, Руководство оператора

Страница: 29 / 44

Putting into service
Rotary cultivators
EL22
27
On the machine side, attach PTO shaft guard chain (1)
around the frame tube.
„ Shear bolt torque limiter
The PTO shaft is fitted with a shear bolt torque limiter on
machine side.
Under difficult working conditions (stony), which may
stop the machine, the shear bolt will shear.
Shear bolt replacement:
- Remove guard (1).
- Remove the fragments of the bolt from the jaws.
- Match the holes in the jaws.
- Fit a new bolt (2) inside yoke.
Part no. 80060850
- Screw up and tighten the self-locking nut moderately.
Part no. 80200830
To avoid serious accidents, the PTO drive
shaft guards must be properly in place and
fixed with the chains provided.
Immediately replace any worn or damaged
guard.
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
To ensure that the torque limiter works
properly, use only KUHN shear bolts.