KUHN CONTROLOR, Инструкция по эксплуатации

Страница: 8 / 36

8
UTILISATION
KEY DESCRIPTION.
The keys are of three colours:
Red keys : programming
White keys:
information (value display)
Black keys: On/Off or modifying the number of rows while working
1 – Starting up the device: Start key
Use keys and to start up the device and switch if off.
When the device is turned on, the software version is displayed briefly. The unit then goes through the set-up procedure
and automatically displays the last function used before the unit was switched off.
If the power supply voltage drops below 9 volts, the device is turned off automatically.
If there is an electronic fault, the unit displays either
HALP 00 or HALP 88
In that case, it must be returned for repairs.
2 – Programming the device: Programming keys
Keys “ +/- ”
Used to change the values of the programmed data.
For the electronic control box to calculate the various values displayed, the following data are required.
-
pulses over 100 metres
- working width
- number of rows