KUHN CONTROLOR, Инструкция по эксплуатации

Страница: 27 / 36

27
ELECTRICAL DISENGAGEMENT OF UNITS.
DESCRIPTION OF OPERATION
The
sowing section disengagement unit
enables up to 8 disengagement solenoids to be operated.
This control unit does not require any modification to the CONTROLOR unit. It is sufficient to slot it in to a sowing
monitoring unit between the CONTROLOR unit and the sowing monitoring wiring harness.
Disengagement is controlled through the
CONTROLOR
unit
itself.
Disengagement is applied from the outside sections towards the inside from the left or from the right or from both sides.
Engagement of all disengaged sections can be effected by pressing a single key. Otherwise it can be done starting from
the centre or from the opposite side towards the left or the right.
Application examples (6-row seed drill fully equipped with disengagement units):
Disengagement of rows
6, 5, 4, 2, 1 successively
from the right Disengagement of rows
1, 2, 3 successively
from the left Disengagement of rows
1 and 2 from the left, 6 and 5 from
the right
Engagement of rows
1, 2, 3, 4, 5, 6 successively from
the centre or the left to the right
Engagement of rows 3, 2, 1
successively from the centre to
the left Engagement of rows 1 and 2 to
the left plus 6 and 5 to the right