KUHN AXIS 20.1, Руководство оператора

Страница: 79 / 216

Standard operating procedure (all models)
67
8
AXIS-GENERAL
8.10.2 Running one pass
Layout

Length of testing area: 60 - 70 m
Figure 8.23: Layout for one pass
Preparing one pass

Select a similar fertiliser from the calibration charts and set the spreader ac-
cordingly.

Set the hopper mounting height of the solid fertiliser broadcaster as specified
in the calibration charts. Make sure that the mounting height includes the top
edge of the trays.

Check the completeness and status of the spreading components (spreading
discs, spreading vanes, outlets).

Place two trays in line as shown in the diagram (distance 1 m) in the overlap
zones (between the tracks) and one tray in the track (corresponding to
figure 8.23 ).
NOTICE
We recommend the layout plan up to a spreading width of 24 m . A layout plan
for larger working widths is included with the practice test kit.
1/2x 1/2x
x