8
2.3.1.
Sub Menu
（
Parameter
）
Chick item of main menu, enter corresponding sub menu, shown in Figure 6, total 6 sub
menu, includes class of parameter and status:
ADDRESS
：
Set light DMX address.
WORKMOD
：
Set light work mode, master or slave mode when in auto run mode.
DISPLAY
：
Set display parameter, eg. select language.
TEST
：
Used for test light, modify DMX channel data to test function
，
the
corresponding function
of reference channel function table.
ADVANCE
：
Set light running parameter.
STATUS
：
view light current status.
Figure 6 Parameter menu
2.4.
Operation and parameter instruction
Via following operation, enter sub menu(parameter menu) shown in Figure 6
In main menu, chick 1/6 function button into corresponding parameter menu.
In sub menu(page), chick main item on the left side of displayer, can shift to
corresponding sub menu(page) quickly.
2.4.1.
Set DMX Address
Click and select the "ADDR", can enter the page of DMX address setting, range from 1 to 512, the
address code shouldn’t is not greater than (512- channels quantity), otherwise the light will
not been controlled. Following is the operation:
Enter the page of DMX address, as shown in Figure 7, click the blank area in right side of display
will pop-up diglog as in Fig. 4, modify value, then click ‘ENTER’ to confirm and save DMX
address code.
Figure 7 page of DMX Address
