SAFETY OPERATING & MAINTENANCE INSTRUCTIONS
SPECIFICATIONS
Crimp Force Develop: 4.5 ton
Length: 652 (L)mm
Weight: 3.2 kg (tool only)
FOR USE ON
- Copper taps from #10 solid to #2/0 stranded.
- Aluminum/ACSR taps from #14 solid to #4/0 ACSR.
- Stirrups from #6 AWG to #4/0 ACSR.
- Copper and aluminum code conductor connectors from #6 AWG to #4/0
stranded.
- Overhead full tension deadend, full and non-tension splices and terminals
from #10 stranded to #4/0 ACSR.
- Convenient for working in tight places and easy to store.
OPERATION
HD-BGD3 and HD-OD3 Die Selection:
- For the HD-BGD3, the upper opening is a “BG” die.
- For the HD-OD3, the upper opening is an “O” die.
- For both the HD-BGD3 and HD-OD3 tools, the lower opening is a “D3” die.
- Interchangeable dies may be used in the lower die opening. Dies that my be
used included:
* Kudos KW-type dies
* Greenlee KD6 series
* Burndy W and X series
* ILSCO ND series
* Huskie HT 58 series
* Panduit CD-2001 series
* Other industry W-type dies
PREVENTIVE MAINTENANCE
- This tool is intended for two-handed operation Maintain a firm grip on both handles when using this tool.
- Inspect tool before use. If any parts are worn or damaged, send the tool to an authorized Kudos Service center.
- Do not perform any service or maintenance other than as described in this manual & Do not exceed the rated capacity of this tool.
Mechanical Crimping Tools
HD-BGD3, HD-OD3
DANGER
Tool are
NOT
insulated for use on near energized
conductors. Use of these tools near energized
conductors may lead to electrical shock, causing
severe injury or death.
DO NOT
use these tools near energized
conductors without adequately insulating
operator and surroundings
Read and understand all of the instructions and
safety information in this manual before operating
or servicing of this tool. Other use of this tool may
lead to serious personal injury or death.
WARNING
Содержание HD-BGD3
Страница 1: ......
