If you are installing a side panel together with this door, please read these
instructions in conjunction with the instructions for the side panel provided
in the side panel packing.
IMPORTANT
Turn the door over on the protective surface, with the inside face of the door facing upwards.
Insert height adjusters into bottom of compensating channel / wall frames at bottom
of door as shown in
fig. 2.1, 2.2 & 2.3
. First insert spiral cam as shown in
fig.2.1
into
both lower sides of frame, next slide height adjuster into both sides of frame and over
spiral cam
fig.2.2
ensure height adjuster "clicks" into spiral cam as it engages and is
fully inserted
fig. 2.3
2.1
2.3
2.2
INSERT SPIRAL CAM
INTO HOLE HERE
ORIENTATE CAM AS SHOWN
SLIDE HEIGHT ADJUSTER INTO FRAME
AND OVER SPIRAL CAM - IT CLICKS TO
ENGAGE.
PUSH HEIGHT ADJUSTER FULLY
INTO FRAME - FLUSH WITH THE
BOTTOM OF THE DOOR
1
2
Remove the sliding door glass from the unit. To do this first un clip the patch fittings
from the bottom rail. Then undo the allen key screw securing the top wheeled units to
the glass using the 4mm Allen key provided. Once the Allen screws are removed
carefully lift the glass up and away from the frame, taking care not to knock any
exposed edges. Do not stand directly onto a tiled floor, we recommend the use of a
towel to stand the glass onto. Remove the wheeled units from the top rail by lifting out
and keep safe.
Remove the screws that secure the four patch fittings of the fixed panel to the door rails, at
the top and bottom of the door.
Fig. 3.1
. Slide the fixed panel towards the centre of the frame
away from the wall post - ensure the rigid gasket on the edge of the glass remains securely
clipped onto the glass edge.
Fig. 3.2
3.1
3.2
PUSH FIRMLY ON PATCH
FITTINGS TO MOVE PANEL
SLIDE OUT
3
Using 2.5mm allen key, loosen grub
screws in stop blocks in the top and
bottom rails and move towards
the fixed panel wall post.
BEFORE CARRYING OUT THESE INSTALLATION INSTRUCTIONS PLEASE DECIDE THE HANDING
OF THE DOOR, IF YOU NEED TO CHANGE THE HANDING READ THROUGH THE SUPPLEMENTARY
INSTRUCTIONS FIRST
