14
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: DLJ-1017 PRODUCT CODE: 51877 12/2015
Instructions (Cont.)
Using the Juice Extractor
The juice extractor fitted into the assembled blender jug turns the Rocket Blender
into a juicer.
For best results, only use soft fruits with the juicer attachment, or
add liquid or juicy fruit when juicing hard, more fibrous fruit or vegetables.
• Cut any soft fruit you want to juice into small chunks that will fit easily into the
juice extractor. Set aside.
• Before you start,
ensure the base is unplugged from the electrical outlet.
• Place the base on a flat, level, stable work surface.
• Screw the cross blade clockwise into the bottom of the jug until secure.
CAUTION!
• Handle with care, t
he blades are very sharp!
Always hold the blade
assembly by the plastic part.
• Check the gasket!
Ensure that the rubber gasket, located on the inside
bottom edge of the blade assembly, is in place.
• The juice extractor attachment fits inside the blender jug with the wide opening
covering the blades. Align the dents in the juice extractor with the four wings
inside the jug.
• Cover the jug with the lid and turn anticlockwise to secure. In order to strain the
juice after extraction, the arrow must point to the spout (see Fig. 10 on page 13).
• To attach the juicer jug assembly, align the three tabs on the outside of the jug
with the three notches on the top inner edge of the base.
• Plug the product into a standard 220-240V AC electrical outlet and switch on
power at the outlet.
• Add the prepared fruit pieces into the juice extractor, then insert the plunger.
• Place one hand on the jug and the other hand on the plunger.
• Press the jug down slightly and twist it anticlockwise to start extracting juice.
Press down the fruit pieces gently using the plunger.
To prevent the motor
from overheating, limit continuous operation to 2 minutes at a time, or to
15 seconds when juicing hard, more fibrous fruit or vegetables.
• To stop juice extraction, press down and twist the jug clockwise to release it.
•
CAUTION:
Wait until the blades have stopped completely before
removing the jug from the base or before removing any food contents.
• Carefully pour the juice into a glass so the pulp stays inside the extractor. Hold
the plunger in place in the juicer to prevent the pulp falling into your juice.
• Unplug the product from the electrical outlet when not in use or left unattended.