manualshive.com logo in svg

Kubota ZG332, Руководство оператора

Поделиться
Скачать
Kubota ZG332 Скачать руководство пользователя страница 83

PERIODIC SERVICE

66

ENGLISH

B

Checking Hydraulic Hose

To avoid personal injury:

A

Be sure to stop the engine, remove the key, and
relieve pressure before checking and replacing
the hydraulic hose.

A

Allow the transmission case to cool down
sufficiently; oil can be hot and may cause
burns.

A

Escaping hydraulic fluid under pressure has
sufficient force to penetrate the skin causing
serious personal injury. Before disconnecting
lines, be sure to relieve all pressure. Before
applying pressure to the system, make sure all
connections are tight and that lines, pipes, and
hoses are not damaged.

Check to see if hydraulic hoses are properly fixed every
200 hours of operation.
1. Check to see that all lines and hose clamps are tight

and not damaged.

2. If hoses and clamps are found worn or damaged,

replace or repair them at once.

3. Fluid escaping from pinholes may be invisible. Use a

piece of cardboard or wood to search for suspected
leaks: do not use hands. Use safety goggles or other
eye protection. 
If injured by escaping fluid, see a medical doctor at
once. Serious infection or reaction will result if proper
medical treatment is not administered immediately. 
This fluid can produce gangrene or severe allergic
reaction.

(1) Mower lift cylinder hose

(1) Cardboard
(2) Hydraulic line
(3) Magnifying glass

Содержание ZG332













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды