Kubota ZD1011-AU, Руководство оператора

Страница: 99 / 102

80 TROUBLESHOOTING
BATTERY TROUBLESHOOTING
If you have any questions, contact your local KUBOTA Dealer.
MACHINE TROUBLESHOOTING
Trouble Cause Countermeasure Preventive measure
Starter does not function. A
Battery overused until
lights are dim.
A
Charge battery
sufficiently.
A
Charge the battery properly.
A
Battery has not been
recharged.
A
Poor terminal
connection.
A
Clean the terminal
and tighten securely.
A
Keep the terminal clean and
tight.
Apply grease and treat with
anti-corrosives.
A
Battery life expired.
A
Replace battery.
From beginning starter
does not function, and
lights soon become dim. A Insufficient charging. A Charge battery
sufficiently. A Battery must be serviced
properly before initial use.
A
Insufficient charging.
A
Adjust fan belt.
When viewed from top,
the top of plates look
whitish. A
Battery was used with
an insufficient amount
of electrolyte.
A
Add distilled water
and charge the
battery.
A
Regularly check the
electrolyte level.
A
Battery was used too
much without
recharging.
A
Charge battery
sufficiently.
A
Charge the battery properly.
Recharging is impossible.
A
Battery life expired.
A
Replace battery.
Terminals are severely
corroded and heat up. A
Poor terminal
connection.
A
Clean the terminal
and tighten securely.
A
Keep the terminal clean and
tight.
Apply grease and treat with
anti-corrosives.
Battery electrolyte level
drops rapidly. A
There is a crack or pin
holes in the electrolytic
cells.
A
Replace battery.
A
Charging system
trouble.
A
Contact your local
KUBOTA Dealer.
Trouble Cause Countermeasure
Machine operation is not
smooth. A Hydrostatic transmission fluid is
insufficient. A Fill oil.
A
Filter is clogged.
A
Replace the filter.
Machine dose not move while
engine is running. A
Parking brake is on.
A
Release the parking brake.
A Transmission fluid level is
insufficient. A Fill oil.
Machine moves when motion
control levers are in "NEUTRAL
LOCK" position.
(Engine is operated.) A
Hydrostatic lever is not correctly
adjusted.
A
Consult your dealer for hydrostatic lever
linkage adjustment or pressure
adjustment.
A
Control linkage pivots are sticking.
A
Full up and lubricate linkage.