Kubota Z724X Скачать руководство пользователя страница 50

Страница: 50 / 96

TIRES AND WHEELS

ENGLISH

Remove and Install Front Caster Wheels

To avoid serious injury:

Do not place your body under the machine or
the mower deck, while lifting the machine.

Removing

1. Park the machine on a firm and level surface.
2. Stop the engine and apply parking brake.
3. Lift the front of machine with a safe lifting device.
4. Remove the lock nut with nylon sleeve and the wheel

bolt.

5. Remove the wheel and dust covers from assembly

yoke.

Installing

1. Install the replacement wheel and dust covers.
2. Install the wheel bolt and the lock nut with nylon

sleeve.

3. Tighten the nut.
4. After installing, add grease to the nipples.

Insert the wheel bolt from the outside of the yoke.

Tighten the nut gradually until wheel bearing play is
eliminated and wheel turns freely by hand.

Reference

5. Lower machine.

Tightening torque

20 to 25 N-m

(14.8 to 18.4 lbf-ft)

(2 to 2.5 kgf-m)

(1) Lock nut
(2) Wheel bolt
(3) Yoke
(4) Dust cover

Содержание Z724X

































































































Результаты поиска

Содержание Z724X

Отзывы:

Похожие инструкции для Z724X

Бренды по названию

Популярные бренды

Kubota Z724X, Руководство оператора

Результаты поиска

Содержание Z724X

Отзывы:

Похожие инструкции для Z724X

Бренды по названию

Популярные бренды