manualshive.com logo in svg

Kubota STV32, Руководство оператора

Поделиться
Скачать
Kubota STV32 Скачать руководство пользователя страница 62

44

TIRES, WHEELS AND BALLAST

ENGLISH

TIRES, WHEELS AND BALLAST

TIRES

To avoid personal injury:

A

Do not attempt to mount a tire on a rim. This
should be done by a qualified person with the
proper equipment.

A

Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the operator's manual.

A

Do not use tires other than those approved by
KUBOTA.

B

Inflation Pressure

Though the tire pressure is factory-set to the prescribed
level, it naturally drops slowly in the course of time. Thus,
check it everyday and inflate as necessary.

A

Maintain the maximum pressure in front tires, if using
a front loader or when equipped with a full load of front
weights.

B

Dual Tires

Dual tires are not approved.

WHEEL ADJUSTMENT

To avoid personal injury:

A

When working on slopes or when working with
trailer, set the wheel tread as wide as practical
for maximum stability.

A

Support tractor securely on stands before
removing a wheel.

A

Do not work under any hydraulically supported
devices. They can settle, suddenly leak down,
or be accidentally lowered. If necessary to work
under tractor or any machine elements for
servicing or adjustment, securely support them
with stands or suitable blocking beforehand.

A

Never operate tractor with a loose rim, wheel,
or axle.

Tire sizes

Inflation Pressure

Rear

9.5-22, 4PR

140 kPa (1.4 kgf/cm )

13.6-16, 4PR

100 kPa (1.0 kgf/cm )

12.4-16, 4PR

120 kPa (1.2 kgf/cm )

Front

6.00-12, 4PR

180 kPa (1.8 kgf/cm )

24 x 8.50-14, 4PR

160 kPa (1.6 kgf/cm )

23 x 8.50-14, 4PR

200 kPa (2.0 kgf/cm )

Содержание STV32







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды