Kubota RTV520 Скачать руководство пользователя страница 74

Страница: 74 / 96

6. Inspect spark plugs for cracked porcelain, pitted

electrodes, or other wear and damage. Replace the
spark plug if necessary.

NOTE :

• Do not clean the spark plug in a machine

using abrasive grit. Some grit could remain
in the spark plug and enter the engine
causing extensive wear and damage.

Recommended spark plug

NGK BKR4E

7. Check the gap using a wire feeler gauge. Adjust

the gap from 0.6 to 0.7 mm (0.024 to 0.028 in.) by
carefully bending the ground electrode.

(A) 0.6 to 0.7 mm (0.024 to 0.028 in.)

8. Reinstall the spark plug into the cylinder head.

Tightening torque

25 to 30 N

⋅

(19 to 22 lbf

⋅

ft)

7. Checking brake pedal

WARNING

To avoid serious injury or death:

• Stop the engine and chock the wheels before

checking brake pedal.

• If movement is outside of the specifications,

contact your local KUBOTA Dealer for adjusting
the brake.

Checking the brake pedal free travel

Proper brake pedal free travel

7 to 14 mm (0.3 to 0.6 in.) on

the pedal

1. Release the parking brake.
2. Slightly depress the brake pedal and measure free

travel at the top of the pedal stroke.

(1) Brake pedal

(A) “FREE TRAVEL”
(B) “PEDAL STROKE”

3. If brake pedal free travel is outside of the

specifications, contact your local KUBOTA Dealer
for adjusting the brake.

Checking the brake pedal stroke

Pedal stroke

Less than 65 mm (2.56 in.) on

the pedal

1. Release the parking brake.
2. Step on the pedal and measure the pedal stroke.
3. If brake pedal stroke is outside of the specifications,

contact your local KUBOTA Dealer for adjusting the
brake.

8. Checking brake light switch

1. Park the vehicle on a flat surface.
2. Step on the brake pedal to check if the brake light

comes on.

3. If it does not, check the bulb or brake light switch.

(1) Brake light switch
(2) Brake pedal

EVERY 300 HOURS

1. Checking tire

1. Check to see if tires are not damaged.

PERIODIC SERVICE

EVERY 200 HOURS

RTV520

Содержание RTV520

































































































Результаты поиска

Содержание RTV520

Отзывы:

Похожие инструкции для RTV520

Бренды по названию

Популярные бренды

Kubota RTV520, Руководство оператора

Результаты поиска

Содержание RTV520

Отзывы:

Похожие инструкции для RTV520

Бренды по названию

Популярные бренды