Kubota RTV520 Скачать руководство пользователя страница 48

Страница: 48 / 96

TIRES AND WHEELS

TIRES

WARNING

To avoid serious injury or death:

• Do not attempt to mount a tire on a rim. This

should be done by a qualified person with the
proper equipment.

• Always maintain the correct tire pressure.

Do not inflate tires above the recommended
pressure shown in the operator's manual.

IMPORTANT :

• Do not use tires other than those approved by

Kubota.

1. Inflation pressure

Though the tire pressure is factory-set to the prescribed
level, it naturally drops slowly in the course of time.
Thus, check it everyday and inflate as necessary.

Tire sizes

Inflation pressure

24 × 9 - 12 HDWS, Front

24 × 11 - 12 HDWS, Rear

97 kPa

(0.99 kgf/cm

, 14 psi)

24 × 9 - 12 ATV, Front

24 × 11 - 12 ATV, Rear

(1) Ground

(A) “INSUFFICIENT”
(B) “NORMAL”
(C) “EXCESSIVE”

2. Tire type and use

Heavy duty work site tire

All terrain vehicle tire

WHEELS

WARNING

To avoid serious injury or death:

• Support vehicle securely on stands before

removing a wheel.

• Never operate vehicle with loose wheel bolts.

IMPORTANT :

• When re-fitting a wheel, tighten the bolts to

the following torques then recheck after driving
the vehicle 200 m (200 yards) and thereafter
according to service interval.

TIRES AND WHEELS

TIRES

RTV520

Содержание RTV520

































































































Результаты поиска

Содержание RTV520

Отзывы:

Похожие инструкции для RTV520

Бренды по названию

Популярные бренды

Kubota RTV520, Руководство оператора

Результаты поиска

Содержание RTV520

Отзывы:

Похожие инструкции для RTV520

Бренды по названию

Популярные бренды