Kubota M5660SUH, Руководство оператора

Страница: 75 / 117

53 TIRES, WHEELS AND BALLAST
B
Front Wheels (with 2-wheel drive)
Front tread width can be adjusted as shown with the
standard equipped tires.
To change the tread width
1. Remove the front axle mounting bolts and the tie-rod
mounting bolts.
2. Move the front axles (right and left) to the desired
position, and tighten the bolts.
3. Adjust the toe-in: [ 1 to 5 mm (0.04 to 0.2 in.)]
(See "Adjusting Toe-in" in "EVERY 200 HOURS" in
"PERIODIC SERVICE" section.)
A
The front tread width for the front loader application on
2WD models should not be greater than 1420 mm
(55.9 in.).
(1) Front axle mounting bolt
124 to 147 N-m (12.6 to 15 kgf-m) [91.5 to 108.9 ft-lbs.]
(2) Tie-rod mounting bolt
61 to 71 N-m (6.2 to 7.2 kgf-m) [44.8 to 52.1 ft-lbs.]
(3) Tie rod clamp
(1) Extension1 (A) "TREAD"