background image

27

OPERATING THE TRACTOR

B

Seat Belt

To avoid personal injury or death:

A

Always use the seat belt when any ROPS or
CAB are installed.

A

Do not use the seat belt if a foldable ROPS or a
retractable ROPS is down or there is no ROPS.

Adjust the seat belt for proper fit and connect the buckle.
This seat belt is auto-locking retractable type.

B

Light Switch

Turn the light switch clockwise, and the following lights are
activated on the switch position.

B

Turn Signal / Hazard Light Switch

C

 Hazard Light

1. When the hazard light switch is pushed, the hazard

lights flash, along with the L/H and R/H indicators on
the instrument panel.

2. Push the hazard light switch again to turn off the

hazard lights.

C

 Turn Signal with Hazard Light

1. To indicate a right turn with the hazard lights already

flashing, turn the switch clockwise.

2. To indicate a left turn with the hazard lights already

flashing, turn the switch counterclockwise.

3. When the left or right turn signal is activated in

combination with the hazard lights, the indicated
turning light will flash and the other will stay on.

C

Turn Signal without Hazard Light

1. To indicate a right turn without hazard lights, turn the

switch clockwise.

2. To indicate a left turn without hazard lights, turn the

switch counterclockwise.

3. When the left or right turn signal is activated without

the hazard lights, the indicated turning light will flash
and the other will stay on.

(1) Seat belt

2. Selecting Light Switch Positions.

......... Head lights OFF.

....... Head lights dimmed, low beam.

....... Head lights ON, high beam.

(1) Head light switch

Содержание M5660SUH






















































































































Отзывы: