Kubota M4N-071, Руководство оператора

Страница: 132 / 152

6. After checking oil is visible through the opening of
check plug, reinstall filling plugs and check plug.
Oil capacity
Front axle gear case
3.0 L (3.2 U.S.qts.) for each
side
Front differential case 5.0 L (5.3 U.S.qts.)
Front axle gear case (both sides, RH not shown in
illustration)
(1) Drain plug
(2) Filling plug (3) Check plug
Front differential case (LH only)
(1) Filling plug (2) Check plug
3. Adjusting engine valve clearance
Consult your local KUBOTA Dealer for this service.
EVERY 1000 HOURS OR 1 YEAR
Be sure to do the following servicing once every 1000
hours or yearly, whichever comes first.
1. Replacing air cleaner primary
element and secondary element
(See Cleaning air cleaner primary element on page
111.)
2. Checking exhaust manifold
Consult your local KUBOTA Dealer for this service.
EVERY 1500 HOURS
1. Cleaning fuel injector nozzle tip
Consult your local KUBOTA Dealer for this service.
2. Checking DEF/AdBlue
®
injector
tip (M5N-091, M5N-111)
Consult your local KUBOTA Dealer for this service.
3. Checking DEF/AdBlue
®
line
(M5N-091, M5N-111)
1. Check to see that all lines from the DEF/AdBlue
®
injector to the tank are securely connected and not
damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) DEF/AdBlue
®
lines (2) Clamp bands
4. Replacing oil separator element
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before replacing the
oil separator element.
1. Remove the cover and take out the element. Wipe
off the oil and the carbon from inside the case with
a clean rag.
2. Fit in a new oil separator element.
PERIODIC SERVICE EVERY 1000 HOURS
126
M4N-071, M5N-091, M5N-111