Kubota M108DC, Руководство оператора

Страница: 39 / 124

19 OPERATING THE TRACTOR
C
Weight and Height adjustment
Turn on the key switch. The seat should be adjusted for
the operator's weight by briefly pulling up or pushing down
the weight / height adjust lever with the tractor in a
stationary position and the operator sitting on the seat.
The seat can be adjusted in its adjustable range.
A
If the seat is lowered below the adjustable range, it
automatically comes up to the lower limit of the
adjustable range just when the weight / height adjust
lever is released.
A
When turning on the key switch, the seat may slightly
move up depending on a preset seat position (height).
A
In order to avoid damage of the seat, do not operate
the weight / height adjust lever for more than 1 minute.
C
Tilt adjustment
Pull the backrest tilt adjust lever and tilt the backrest to the
desired position.
C
Arm rest
Armrest may be set at upright position if desired.
C
Arm rest angle adjustment
Turn the arm rest angle adjust knob to the desired angle.
A
After adjusting the operator's seat, be sure to check to
see that the seat is properly locked,
B
Seat Belt
To avoid personal injury or death:
A
Always use the seat belt when any ROPS or
CAB are installed.
Adjust the seat belt for proper fit and connect the buckle.
This seat belt is auto-locking retractable type.
B
Tilt Steering Adjustment
To avoid personal injury:
A
Do not adjust the steering wheel while the
tractor is in motion.
Press down the steering wheel tilt pedal, to release the
lock so the steering wheel can be adjusted to one of 7
desired positions.
B
Light Switch
Turn the light switch clockwise, and the following lights are
activated on the switch position.
(1) Seat belt
(1) Steering wheel tilt pedal (A) "PRESS DOWN"
2. Selecting Light Switch Position.
OFF...... Head lights OFF.
....... Head lights dimmed, low beam.
....... Head lights ON, high beam.
(1) Head light switch