Kubota LD1607, Руководство пользователя

Страница: 10 / 28

-2
4. SERVICING THE ATTACHMENT
1. Always wear safety goggles when servicing or
repairing the machine.
2. Do not modify the attachment. Unauthorized
modification may affect the function of the attachment
which may result in personal injury.
3. Do not use the attachment as a work platform or a
jack to support the tractor for servicing or
maintenance. Securely support the tractor or any
machine elements with stands or suitable blocking
before working underneath. For your safety, do not
work under any hydraulically supported devices. They
can settle or suddenly leak down or be accidentally
lowered. Where possible, remove the loader prior to
servicing or repairing the tractor. If this is not
possible, ensure that the Boom Stopper is fitted.
4. Escaping hydraulic oil under pressure can have
sufficient force to penetrate the skin, causing serious
personal injury. Do not use hands to search for
suspected leaks. If injured by escaping fluid, obtain
medical treatment immediately.
5. Fluid escaping from pinholes may be invisible. Do not
use hands to search for suspected leaks; use a piece
of cardboard or wood. Use of safety goggles or other
eye protection is also highly recommended. If injured
by escaping fluid, see a medical doctor at once. This
fluid will produce gangrene or severe allergic
reaction.
(1) Cardboard
(2) Hydraulic Line
(3) Magnifying Glass
6.
When servicing or replacing pins in cylinder ends,
bucket, etc., always use a brass drift and hammer.
Failure to do so could result in injury from flying metal
fragments.
DANGER, WARNING AND CAUTION
LABELS
(1) Part No. 75546-564729
Do not put hands near attachment.
(1) Label attached to both sides of the bucket.
CARE OF DANGER, WARNING AND
CAUTION LABELS
1. Keep danger, warning and caution labels clean and
free from obstructing material.
2. Clean danger, warning and caution labels with soap
and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and
caution labels with new labels from your local
KUBOTA Dealer.
4. If a component with danger, warning and caution
label(s) affixed is replaced with new part, make sure
new label(s) is (are) attached in the same location(s)
as the replaced component.
5. Mount new danger, warning and caution labels by
applying on a clean dry surface and pressing any
bubbles to outside edge.