Kubota LA535 Скачать руководство пользователя страница 32

Страница: 32 / 59

10. Precautions for handling large

heavy objects

DANGER

To avoid personal injury or death:

• Handling large, heavy objects can be dangerous

due to the following reasons.

– Danger of rolling the tractor over
– Danger of upending the tractor
– Danger of the object rolling or sliding down

the loader boom onto the operator

• If you must handle large, heavy objects, protect

yourself by the following methods.

– Do not lift load higher than necessary to

clear the ground when the tractor is moving

– Add rear ballast to the tractor to

compensate for the load

– Do not lift large objects with equipment not

equipped an anti-rollback device

– Move the machine slowly and carefully
– Avoid rough terrain
– Keep the transport distance as short as

possible and carry the load as low as
possible during transport

– Make sure that the loader and the bucket are

at proper height and have stopped moving
before transport

VALVE LOCK

The control valve is equipped with a valve lock.

WARNING

To avoid personal injury or death from crushing:

• Do not utilize the valve lock for machine

maintenance or repair.

• The valve lock is to prevent accidental actuation

when implement is not in use or during
transport.

The control valve can be locked when the loader
control lever is in the

“Neutral”

position.

The lock is not intended to, and will not, prevent a leak
down of the implement during the period of storage.

[CAB]

(1) Lock lever

(A)

Lock

(B)

Unlock

[ROPS]

(1) Lock lever

(A)

Lock

(B)

Unlock

FRONT REMOTE HYDRAULIC

CONTROL SYSTEM (IF

EQUIPPED)

This system can be used for a front mounted hydraulic
implement, as it provides hydraulic oil to the front outlet
directly.

1. Installing the hydraulic quick

coupler

1. Remove the cap from the front hydraulic outlet.

OPERATING THE LOADER

TECHNIQUES FOR OPERATING THE LOADER AND THE TRACTOR

LA535

Содержание LA535




























































Результаты поиска

Содержание LA535

Отзывы:

Похожие инструкции для LA535

Бренды по названию

Популярные бренды

Kubota LA535, Руководство оператора

Результаты поиска

Содержание LA535

Отзывы:

Похожие инструкции для LA535

Бренды по названию

Популярные бренды