ASSEMBLY INSTRUCTIONS
2
3. After assembly check
(1) Before operating or test driving the equipment,
read and understand the operator's manual.
(2) Once the equipment is fully
assembled, select a safe
place for a test run. Prevent
onlookers from approaching
the equipment.
To avoid personal injury or
death:
A
Do not start engine or
operate levers from
anywhere other than the
seat.
To avoid personal injury:
A
Do not bypass-start the
equipment. Short circuiting
the starter terminal runs the
risk that the equipment will
start operating or moving
unexpectedly.
UNPACKING AND CHECKING PARTS
B
Unpacking Wooden Crate
1. Cutting metal bands (if two are banded together).
Metal bands hold the two crates together as one. Cut
these bands and separate the crates.
2. Unpacking the crates
(1) Hook a hoist to the 4 corners of the crate and raise
the hoist cable until taut.
This serves to prevent the upper part of the crate
from striking the loader when cut.
(2) Saw the crate as indicated in figure 1.
A
Sawing outside the indicated area may damage the
loader or accessory parts.
A
Be sure that the crate is free of other obstructions (e.g.
nails, staples and etc.).
(3) Raise the upper part of the crate and remove from
the immediate area.
(4) Remove the remaining slats from the crate. These
are indicated by the oblique lines in
Figure 1
...
