manualshive.com logo in svg

Kubota LA1154, Руководство по сборке

Поделиться
Скачать
Kubota LA1154 Скачать руководство пользователя страница 31

29

ASSEMBLY INSTRUCTIONS

2. Set the orifice into the port.

A

Be careful not to confuse the orifice direction.

3. Attach the adapter back to the accumulator valve.

4. Connect the accumulator assembly (RH) to the main

frame (RH).

5. Fit the boom section adapter in position, and connect

the hose between the accumulator valve and the
control valve.

[Standard valve]

(1) Port

(A) Adapter side
(B) Accumulator valve side

(1) Accumulator assy (RH)
(2) Adapter assy (3/4-UNF)

Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.

(1) Main frame (RH)
(2) Accumulator assy (RH)
(3) 2-M10 x 110 bolts
     2-M10 spring lock washers

Tightening torque: See "TIGHTENING TORQUE OF
BOLTS AND NUTS" section.

(1) Hydraulic hose 13 with sleeve 
     (850 mm (33.5 in.), 3/4-UNF and 3/4-UNF) 

Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.

(2) Hydraulic hose 12 with sleeve  
     (385 mm (15.2 in.), 3/4-UNF and 3/4-UNF)

Tightening torque: See "TIGHTENING TORQUE OF
ADAPTORS, ELBOWS AND OTHERS" section.

Содержание LA1154
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды