Kubota KX101-3a2, Руководство оператора

Страница: 115 / 164

Maintenance
115
•
Operate the boom, arm, bucket and boom swing
mechanism so that all hydraulic cylinders are extended half
way. Lower the dozer onto the ground. See the "Placing out
of operation" section (page 79).
• Open the valve chamber cover (page 91).
Draining the hydraulic oil
•
Place a container with a minimum capacity of 50 litres under
the hydraulic oil drain plug.
•
Remove the drain plug (1) and drain the hydraulic oil.
•
Install the drain plug with a new sealing ring on it.
Filling in hydraulic oil
Filling quantity with oil change: 33 L
Total hydraulic system capacity: 41 L
•
Screw out the breather filter (1).
•
Insert a clean funnel with a strainer into the filler opening.
•
Fill hydraulic oil to half way up the sight glass (figure below,
position 1).
• Screw in the breather filter (1) until tight.
• Start the engine and operate all control functions.