Kubota KX033-4, Руководство оператора

Страница: 122 / 123

100 LIST OF SCREENS
14
Cool-down during
overheat idling
The engine automatically
reduces rpm's to avoid an
overheat.
Leave the engine idling until
this warning disappears.
Do not stop the engine
because the coolant
temperature will increase
sharply and may boil and
gush out. Be sure to cool
down the engine without
stopping it.
Refill the radiator with
coolant by the amount that
overflowed amount. Unclog
the radiator and other
components before use
again.
Check also the hydraulic
system for oil leak and other
troubles.
If an oil leak is found,
immediately contact your
local dealer for repair.
15
Water temperature
sensor error
Water temperature sensor
system is in trouble.
The meter does not show
water temperature.
Press the display selector
switch, and the normal
display is switched back.
The machine's other
functions are operative, but
an overheat and other
problems cannot be
detected.
Immediately contact your
local dealer.
16
Lock lever system
error
The lock lever system is in
trouble. The engine can run, but the
machine fails to move. Immediately contact your
local dealer.
17
Travel 2-speed
system (switching)
The 2-speed switching
system is in trouble.
The machine still runs at low
speed without switching to
high speed.
The machine's other
functions are still operative.
Immediately contact your
local dealer.
18
AI system error
The auto idle system is in
trouble.
The accelerator fails too.
The accelerator fails, but the
machine's other functions
are still operative.
Move the machine to a place
suited for repair.
Immediately contact your
local dealer.
19
5V short-circuit
The sensor's 5V power
supply is short-circuited.
The majority of systems fail.
* The engine may get started
and the machine may move.
But do not try any jobs.
(Just move the machine to a
safe place.)
Immediately contact your
local dealer.
No.
Message
Problem or failure
(What happened)
Machine behavior
(Provisional measure)
Correction