background image

13

PERIODIC SERVICE

EN

GLISH

B

Cleaning the fuel filter pot

Every 100 hours of operation, clean the fuel filter in a
clean place to prevent dust intrusion. 
1. Close the fuel filter lever.

2. Remove the top cap, and rinse the inside with diesel

fuel. 

3. Take out the element, and rinse it with diesel fuel. 
4. After cleaning, reinstall the fuel filter, keeping out of

dust and dirt.

5.  Air-bleed the injection pump.

A

Entrance of dust and dirt can cause a malfunction of
the fuel injection pump and the injection nozzle. Wash
the fuel filter cup periodically. 

ENGINE OIL

To avoid personal injury:

A

Be sure to stop the engine before
checking and changing the engine
oil and the oil filter cartridge.

A

Do not touch muffler or exhaust
pipes while they are hot; Severe
burns could result. Always stop the
engine and allow it to cool before
conducting inspections,
maintenance, or for a cleaning
procedure. 

A

Contact with engine oil can damage
your skin. Put on gloves when using
engine oil. If you come in contact
with engine oil, wash it off
immediately.

A

Be sure to inspect the engine, locating it on a
horizontal place. If placed on gradients accurately, oil
quantity may not be measured.

A

Be sure to keep the oil level between upper and lower
limits of the oil gauge. Too much oil may cause a drop
in output or excessive blow-by gas. On the closed
breather type engine in which mist is sucked through
port, too much oil may cause oil hammer. While too
little oil, may seize the engine's rotating and sliding
parts. (The closed breather is an option.) 

B

Checking level and adding engine oil

1. Check the engine oil level before starting or more than

5 minutes after stopping the engine.

2. Remove the oil level gauge, wipe it clean and reinstall

it. 

3. Take the oil level gauge out again, and check the oil

level. 

(1) Fuel filter lever
(2) Fuel filter pot

(A) "OFF" 
(B) "ON" 

(1) O ring 
(2) Filter element 
(3) Spring
(4) Filter bowl 
(5) Screw ring 

(1) Oil filler plug
(2) Oil level gauge

[Lower end of oil level gauge] 
(A):Engine oil level within this 
     range is proper.

E.book  13 ページ  2011年5月31日 火曜日 午後3時45分

Содержание D662-E







































Отзывы: