MAINTENANCE
OM 0287SB-A
20
Figure 8
Auger Repositioning
(Figure 8)
After shear bolt breakage on one of the augers,
make sure to reposition the augers as shown
on the figure below.
Drive Chain Tension Adjustment
(Figure 9)
Remove the driveline guard. Loosen the four
bolts securing the reduction box to the
snowblower. Tighten the chain in order to leave
approximately 1/4" deflection. Tighten the four
bolts securing reduction box to the snowblower
and reinstall the driveline guard.
L
UBRICATION
Use a good grease gun and lubricate as follows:
DESCRIPTION
INTERVAL
LUBRICATION REQUIRED
8 hours
Grease each universal joint
Driveline
24 hours
Separate the sliding parts and cover each one of
them with grease
Driving chain
4 hours
and after each
operation
Lubricate with chain saw lubricant
Auger
24 hours of operation
or once a year
whichever comes first
Grease fitting on each auger section
Gearbox
every month
Check oil level. If needed, add AGMA 5EP
extreme pressure oil, SAE 80W90 gear oil or
equivalent.
Figure 9
Содержание BX2750D
