65
PERIODIC SERVICE
B
Changing Transmission Fluid
To avoid personal injury:
A
Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. To drain the used oil, remove the drain plug at the
bottom of the transmission case and drain the oil
completely into the oil pan.
2. After draining reinstall the drain plug. Clean the
transmission strainer. Fill with new KUBOTA SUPER
UDT fluid up to the upper notch on the dipstick.
(See "LUBRICANTS" in "MAINTENANCE" section
and "DAILY CHECK" in "PERIODIC SERVICE"
section.) After running the engine for a few minutes,
stop it and check the oil level again, add oil to
prescribed level. Properly dispose of used oil.
A
Do not operate the tractor immediately after changing
the transmission fluid.
Run the engine at medium speed for a few minutes to
prevent damage to the transmission.
B
Cleaning Transmission Strainer
When changing the transmission fluid, disassemble and
rinse the strainer with nonflammable solvent to completely
clean off filings.
When reassembling be careful not to damage the parts.
A
Since the fine filings in the oil can damage the
precision component parts of the hydraulic system, the
end of the suction line is provided with an oil strainer.
Oil capacity
11.6 L (3.1 U.S.gals.)
(1) Drain plug
(1) Oil inlet
(2) Dipstick
(A) Oil level is acceptable within
this range.
(1) Strainer
(2) Filter plate
Содержание BX1870
